Search results for "Masonry infill"
showing 10 items of 15 documents
Prediction of the additional shear action on frame members due to infills
2014
Infill masonry walls in framed structures make a significant contribution to the response under seismic actions. With special regard to reinforced concrete (RC) structures, it is known that internal forces modifications caused by the frame–infill interaction may be not supported by the surrounding frame because of the additional shear forces arising at the ends of beams and columns. Such additional forces may lead to the activation of brittle collapse mechanisms and hence their prediction is basic in capacity assessment, especially for structures that disregard the details for seismic zones. In this paper a parametric study is carried out addressed to the prediction of the shear forces ment…
Infilled frames: Developments in the evaluation of cyclic behaviour under lateral loads
2005
In order to consider the modified seismic response of framed structures in the presence of masonry infills, proper models have to be formulated. Because of the complexity of the problem, a careful definition of an equivalent diagonal pin-jointed strut, able to represent the horizontal force-interstorey displacement cyclic law of the actual infill, may be a solution. In this connection the present paper, continuing a previous work in which a generalised criterion for the determination of the ideal cross-section of the equivalent strut was formulated, analizes some models known in literature for the prediction of the lateral cyclic behaviour discussing their field of validity. As a support of…
Influence of column shear failure on pushover based assessment of masonry infilled reinforced concrete framed structures: A case study
2017
Structural frames, constructed either of steel or reinforced concrete (RC), are often infilled with masonry panels. However, during the analysis of the structural frames, it has become common practice to disregard the existence of infills because of the complexity in modeling. This omission should not be allowed because the two contributions (of infills and of frames) complement each other in providing a so different structural system. The use of different modeling assumptions significantly affects the capacity as well as the inelastic demand and safety assessment. In specific, the adoption of equivalent diagonal pin-jointed struts leaves open the problem of the evaluation of the additional…
A semi-empirical stress-strain model for equivalent strut fiber-section modeling of infilled frames
2017
Infill-frame interaction is commonly modeled by means of equivalent strut macro-models. The main difficulty in using this phenomenological approach is to properly calibrate a force-displacement curve for the struts, as this depends not only on the geometrical and mechanical properties, but more specifically on the different potential damage mechanisms which may occur for the infill-frame system subject to lateral forces. If fiber-section elements are used as diagonal struts, the force-displacement curve is substituted by a stress-strain law. In both cases, the attribution of the inelastic law of the struts, based on a mechanical approaches, is not valid in general, as mechanical approaches …
EVALUATION OF FRAGILITY OF INFILLED FRAME STRUCTURES SUBJECT AFTERSHOCKS BY MEANS OF DOUBLE INCREMENTAL DYNAMIC ANALYSIS APPROACH
2018
The paper investigates the role of masonry infill walls on the seismic fragility of reinforced concrete structures subject to mainshock/aftershock sequences. An assessment framework aimed at determining aftershock fragility curves of bare frames and infilled frames is presented. The framework is based on a Double Incremental Dynamic Analysis (D-IDA) approach, which provides the adoption of ground motions defined by combining a fixed intensity mainshock with a set of variable intensity aftershocks. Mainshock (MS) intensity is scaled several times and combined with the same set of aftershocks (AS). Chord-rotation and shear limit states are specifically defined to consider the influence of mas…
Macroelement Model for In-Plane and Out-of-Plane Responses of Masonry Infills in Frame Structures
2018
A new macroelement model is presented in this paper for the simulation of the in-plane (IP) and out-of-plane (OOP) response of infilled frames subjected to seismic actions. The model consists of two diagonal, one horizontal, and one vertical struts. Each strut is represented by two fiber-section beam-column elements. The model is able to capture the arching action of the wall under an OOP load as well as the interaction between the IP and OOP actions. The proposed modeling approach is sufficiently simple and efficient that it can be used for the static or dynamic analysis of an entire structural system. An experimental validation has been carried out. A further numerical study performed wit…
Definition of diagonal Poisson's ratio and elastic modulus for infill masonry walls
2014
The prediction of the response of infilled frames through the simplified approach of substituting the infill with an equivalent pin-jointed strut is treated. In this framework the results of an experimental study for the mechanical characterization of different types of masonry infills having the aim of estimating strength, Young modulus and Poisson's ratio are presented. Four types of masonry were investigated and subjected to ordinary compressive tests orthogonally to the mortar beds and along the directions of the mortar beds. The experimental campaign confirmed the possibility of using an orthotropic plate model for prediction of the Poisson's ratio and Young modulus along the diagonal …
Infilled frames: developments in the evaluation of the stiffening effect of infills
2003
In order to consider the modified seismic response of framed structures in the presence of masonry infills, proper models have to be formulated. Because of the complexity of the problem, a careful definition of a diagonal pin-jointed strut, able to represent the horizontal force-interstorey displacement cyclic law of the actual infill, may be a solution. In this connection the present paper shows a generalized criterion for the determination of the ideal cross-section of the strut mentioned before. The procedure is based on the equivalence between the lateral stiffness of the actual infilled frame scheme during the conventional elastic stage of the response and the lateral stiffness of the …
MODELLING IN-PLANE AND OUT-OF-PLANE RESPONSE OF INFILLED FRAMES THROUGH A FIBER MACRO-MODEL
2017
A new fiber macro-model for the simulation of combined in-plane and out-of plane response of infilled frames subjected to seismic actions is presented in the paper. The model consists of 4 pinned struts (two diagonals, one horizontal and one vertical) modeled with the nonlinear beam/column fiber-section elements available in OpenSees. The model is particularly suitable to predict the out-of-plane response as fiber-section elements can account for the coupling between axial load and bending moment occurring because of the arching mechanism developed by the infills beyond the first cracking. Moreover the model can account for the effect of the reciprocal damaging accumulated both in-plane and…
Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling
2014
The recent large interest in nonlinear seismic analysis methods, static and dynamic, has required proper strategies of modeling based on reliable, and at the same time easy to use, constitutive laws for the structural elements. Regarding the behavior of framed structures, special attention has to be devoted to infills because of the key role they play in modifying overall stiffness, strength and ductility under seismic excitation. Pointing out the attention on this topic the paper discusses a criteria for modeling the structural behavior of infills based on a macromodeling approach, that is to say on the substitution of infills with diagonal pin jointed struts. Is here shown how multilinear…